This Mr. S Chastity piece has a small anchoring device inside the tube, so you can't pull your cock out of it once locked up. This rod has a square hole that fits into the single square pin affixed to the cock ring. At the other end of the thin rod is a rubber adjustable noose that fits behind the head of your dick. This holds your cock against the end of the tube preventing you from pulling your cock out once you are locked up. (see photos) There is a piss hole at the end of the stainless steel shaft tube. We have now also added a SLOT hole at the tip as another option, (CB310PA) esp. for those of you who have a PA. You can slide your PA out thru the slot and put a small lock on it, which will secure your cock from sliding up inside. Or if you have a captive ball on your PA ring, that will do the trick all by itself.

The unique feature of this Mr. S Cock Lock is the single 'Square' center pin. This prevents the tube from twisting and avoids the need for any other side pins. This square pin goes thru a square hole attached to the top of the shaft tube.

This deluxe set comes with three 3 different sized hand made cock rings, shaft tube and anchoring noose, plus the lock. A true work of art! See the full range of pictures by scrolling down the list.

Rings Measure 1 5/8", 1 3/4" and 1 7/8"
Tube measures 1 3/8" internally and 4" long

The complete set comes with the 3 sized rings above. You can order a smaller (1 1/2") ring or a Larger (2") ring separately for an extra $25.00 each... or you can exchange one of the sizes in the set for a different size.

This is a Mr. S Leather Exclusive. Made in the USA